DMR test file 1
Feb16
on February 16, 2016
at 6:29 pm
- Version
- Download 1
- File Size 1,024.00 KB
- File Count 1
- Create Date February 16, 2016
- Last Updated February 16, 2016
DMR test file 1
This is a test file
Palms West Amateur Radio Club
Serving the Western Communities of Palm Beach County Florida
Random Ham Stuff
My, how time flies. This is a post I have been meaning to write for nearly 3 years now. Back in late 2018, after a search for a small portable SW receiver, I purchased a C Crane Skywave SSB. It had a lot of the things I wanted in a portable radio and, at the […] [...]
Next month (August) will mark 10 years since I built my little Sproutie HF Regen Receiver. I recently received an email from Bob W3BBO. A few years ago, he built a Sproutie, and he has just built another one – more on that later. Bob’s first Sproutie is shown in this post, along with a […] [...]
I don’t need to explain the attraction of low power operation; if you’re reading this, the chances are that you are already a convert. I’ve been operating with low power ever since first being licensed in the UK in the late 70’s as G8RYQ, and then G4IFA. One of my first rigs was a homebrew […] [...]
As well as the small stash of finished projects that grace my living space, I also have two small boxes containing various boards. Some of them are boards from part-finished projects that didn’t work. For whatever reason, I ran out of steam and, instead of troubleshooting them, put them carefully into a small box along […] [...]
Here’s a little project I put together on a whim about 18 months ago. It was my tribute to the unlicensed (i.e. pirate) beacon cluster around 4096 KHz. There were several of them operating in full force, with powers ranging from around 100mW to a watt or so a few years ago. Their heyday was […] [...]
Back in 2009/2010 the Arizona QRP Scorpions released a little kit designed by Dan N7VE, called the Fort Tuthill 80. It was a QRP CW transceiver, with a direct conversion receiver and a transmitter capable of putting out about 3W. It caught my imagination, and I just had to build it. I have never had […] [...]
Some years ago, I purchased and assembled an Oak Hills Research WM-2 QRP Wattmeter from Milestone Technologies. As far as QRP wattmeter kits go, it was something of a classic at the time, and as such, I wanted one. I’m glad I made this purchase, as they are no longer available – at least, in […] [...]
Before building Jim W4LF’s Hobbydyne™ crystal set, I put together an impedance matchbox, for matching the detector diode to a variety of different headsets and earphones, so that I could determine the best ones to use. The world of serious crystal set listening was new to me, so I did some reading up. To give […] [...]
Growing up as the youngest of 4 boys, I was well positioned to receive all the hand-me-downs. Although that might sound as if I just ended up with second-rate stuff, that was not the case at all. I inherited a lot of great things from my older brothers. I couldn’t have cared less that they’d […] [...]
I first tried WSPR out in 2009, with a Signalink USB interface attached to my FT-817 and PC. For anyone interested in QRP and QRPp, the process of being able to decode a signal that is up to about 34dB below the noise level is quite fascinating. Morse code, sent by way of CW, engages […] [...]